- Home
- >
- Products
- >
- Hi Rail Excavator
- >
- JG150L railway ballast undercutter and railroad sleeper changer ballast tamping machine
JG150L railway ballast undercutter and railroad sleeper changer ballast tamping machine
Brand :JINGGONG
Product origin :CHINA
Delivery time :45DAYS
Supply capacity :5000 UNITS
JG150L railway ballast undercutter and railroad sleeper changer ballast tamping machine.
The railway multifunctional machine is mainly composed of several major components such as crawler excavator, sleeper changing operation device, ballasting operation device, rail guiding device and other additional attachments.
The main purposes are as follows:
It can be used for partial and batch sleeper replacement operations in the maintenance of standard gauge lines.
It can be used for ballast excavation in the maintenance of standard gauge lines.
The operating arm equipped with the vehicle can load and unload cargo (the weight of the cargo is within the limit).
The onboard hydraulic system can provide power source for external hydraulic tools.
Replaced with ballasting device can be used for local or turnout ballast replacement operations.
Replaced with tamping device can be used for ballast tamping operation.
ITEM | 80L | 100L |
5.1 Machine parameters | ||
Ambient temperature | -25~45℃ | -25~45℃ |
Altitude | ≤3000m | ≤3000m |
Relative humidity | no greater than 90% | no greater than 90% |
Wind speed | ≤15m/s | ≤15m/s |
Applications | Outdoor work, can withstand wind, sand, rain and snow | Outdoor work, can withstand wind, sand, rain and snow |
Transport length | 6100mm | 7400 |
Total width | 2200mm | 2250mm |
Transport height | 2650mm | 2750mm |
Safe working height under the contact net | 3700mm | 3700mm |
Maximum operating radius length | 6594mm | 6800mm |
Minimum ground clearance | 280mm | 280mm |
Radius of tail gyration | 1950mm | 2150mm |
Working weight | About 8t | About 10t |
Maximum digging force | 45kN | 55KN |
Track center distance | 1570mm | 1570mm |
Applicable railway gauge | 1435mm | 1435mm |
Pillow changing efficiency | ≥40pcs/h | ≥40pcs/h |
5.2 Engine | ||
Model number | YC4DK70-T303YUCHAI 50KW | YC4FA85-T300 YUCHAI 73.5KW |
Form
| Upright, four-stroke, water-cooled, electronic injection, pressurized, common rail | Upright, four-stroke, water-cooled, electronic injection, pressurized, common rail |
Number of cylinders×bore×stroke | 4×98×120 | 4×98×120 |
Displacement | 3.621L | 3.621L |
Rated net power/speed | 50kW±5%/2300 rpm | 73.5kW±5%/2200 rpm |
Noise | Meet GB14097-1999 requirements | Meet GB14097-1999 requirements |
Emission | Meet GB20891-2014Phase III emission limit requirements | Meet GB20891-2014Phase III emission limit requirements |
5.3 Hydraulic, swing, drive and brake | ||
Hydraulic pump model | LP072B | LP085.00 |
Walking motor model | JXD043.00 | KY10VC |
Swing motor model | IWYHG33 | JHD048F |
Drive way | Hydraulic drive | Hydraulic drive |
Brake | Mechanical lock and hydraulic release | Mechanical lock and hydraulic release |
5.4 Standard configuration | Walking high and low gear speed, knob type throttle, AM/FM radio, flushable floor mat, air conditioner, 6 inch and above LCD monitor, fuel pre-filter, full metal shield. |